Tech-source Raptor DL-Lite Drivers for Linux Manuel d'utilisateur télécharger pdf (Page 26)

Raptor DL-Lite Drivers for Linux Installation & Reference Manual

4-6

Modes "2560x1600"

EndSubSection

EndSection

# TSI Raptor DL-LITE XFree86 Configuration Sections

4.6 Selecting Bit-Depths

4.6.1 Setting Bit-Depths

The DL-Lite card supports 8-bit, 24-bit, 8+24-bit, 8+8, mox16,

mox24 and mox32 modes. By default these cards start up in 8-

bit mode.

These modes can be selected by modifying the Device section

and Screen section of the XF86Config file appropriately.

To set the bit-depth to 8-bit, the "Mode" option in the Device

section needs to be set to 8 and the other values should remain

unchanged.

To set the bit-depth to 24, the "Mode" option needs to be set to

"24" as shown:

Section "Device"

Identifier "Raptordlt0"

Driver "rapdlt"

Card "TSI Raptor DL-LITE card"

BusID "PCI:0:12:0"

Option "Device" "/dev/rapdlt0"

Option "Mode" "24"

Option "ScaleCursPos" "on"

EndSection

To select the 8+24-bit mode, the "Mode" option should be set to

8+24 as shown in the following example. In this case the default

visual is 8-bit PsuedoColor.

Section "Device"

Identifier "Raptordlt0"

Driver "rapdlt"

Card "TSI Raptor DL-LITE card"

BusID "PCI:0:12:0"

Option "Device" "/dev/rapdlt0"

Option "Mode" "8+24"

Option "ScaleCursPos" "on"

EndSection

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Pas de commentaire

Tech-source Raptor DL-Lite Drivers for Linux Manuel d'utilisateur Page 26