Tech-source Raptor OpenWindows for Solaris Manuel d'utilisateur télécharger pdf (Page 15)

Chapter 2 – Hardware Installation

2-3

2.3 Raptor 2100/2500 FPS Installation

Figure 2-1 – Raptor 2100 Digital Flat Panel Subsystem

Tech Source offers two flat panel subsystems: the Raptor

2100FPS with a resolution of 2048x2048 (4MP), and the Raptor

2500FPS with a resolution of 2560x2048 (5MP). Each subsystem

is comprised of one LCD flat panel (4MP or 5MP), one Raptor

2500T-DL graphics card, and a standard Dual-Link DVI cable to

connect them together.

On the back of the Raptor LCD panel are two DVI inputs, labeled

A and B. Plug the Dual-Link DVI cable into either

port. Optionally, connect a second Raptor 2500T-DL card to

the remaining port. Select which signal to display by accessing

the OSD (on-screen display) or by sending the appropriate signals

to the panel's RS232 interface. For more information on the

RS232 interface, please refer to the Raptor LCD manual.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

Pas de commentaire

Tech-source Raptor OpenWindows for Solaris Manuel d'utilisateur Page 15